Dacromet metal coating is a high-tech, in operation, our market needs to maintain the coating machine, we know that everything needs to be cared for, so in the industrial industry, the maintenance and maintenance of equipment is very important , let's take a look at the maintenance methods of the environmentally friendly metal coating machine.
1. After the main motor of the coating machine runs for 1000 hours, the reduction box should be supplemented with No. 32 lubricating oil, and the No. 32 lubricating oil should be replaced every 3000 hours.
2. Each bearing is lubricated with lubricating oil, and the oil hole is added once a week. For those lubricated with grease, it needs to be checked once a month. Wheels, chains and refueling parts that have not been operated for 100 hours should not be added too much, otherwise the excess oil droplets will easily splash and contaminate the paint during operation;
3. After every 600 hours of operation of the coating machine, check the bearings of each roller, clean the oil, and replenish calcium-based grease. In addition, check and clean the bearings of each tension wheel and bridge wheel every 500 hours, and replenish lubricating oil (grease);
Dacromet metal coating
4. Clean the inside of the drying tunnel, after 500 hours of operation, clean the internal residue and dirt, check whether the heating tube can be heated normally, clean up the dirt on the impeller of the fan, and use a vacuum cleaner to remove the dust in the drying tunnel after cleaning. Blow off the adsorbed residue with compressed air;
5. In order to ensure the cleanliness of the inside of the drying tunnel, the waste aluminum plate and waste paint must be used for 3 to 4 times after cleaning, so as to remove the dirt in the drying tunnel and prevent the product from being polluted during normal production.
After understanding the maintenance method of Dacromet metal coating, if you still don't understand, please pay attention to our website, we are happy to serve you.
