Anti-corrosion coating has been widely used in the industrial field due to its environmental protection, high corrosion resistance, high heat resistance, good permeability and no hydrogen embrittlement. However, there are still some deficiencies in anti-corrosion coating. Post-processing.
1. The power-down performance of anti-corrosion coating is average, and it is not easy to be used for conductively connected parts such as electrical grounding bolts, etc.;
2. Anti-corrosion coating is a high-temperature sintered layer. Compared with other traditional treatment methods, the surface hardness and scratch resistance of anti-corrosion coating are slightly worse, so it must be post-treated when used in special occasions.
During use, the centrifuge drum, dryer, and liquid slag mesh belt should be cleaned frequently to avoid adhesion to the workpiece and affect product quality. Dacromet processing equipment should pay attention to the details during use, and do not use various organic materials for a long time Solvents, avoid damaging the surface paint, and avoid direct sunlight and other Dacromet coatings.
Through the introduction of this article, I believe that everyone has already had their own introduction on how to deal with anti-corrosion coating in special occasions. If you want to know more about it, please lock our official website, and we will continue to update and summarize it later.
